Title of Regulation: 18VAC50-22. Board for Contractors Regulations (amending 18VAC50-22-20, 18VAC50-22-30).

Statutory Authority: §§ 54.1-201 and 54.1-1102 of the Code of Virginia.

Public Hearing Information:

January 21, 2015 - 10 a.m. - Department of Professional and Occupational Regulation, Perimeter Center, Training Room 2, 9960 Mayland Drive, Richmond, VA 23233

Public Comment Deadline: January 30, 2015.

Agency Contact: Eric L. Olson, Executive Director, Board for Contractors, 9960 Mayland Drive, Suite 400, Richmond, VA 23233, telephone (804) 367-2785, FAX (866) 430-1033, or email contractors@dpor.virginia.gov.

Basis: Section 54.1-1102 of the Code of Virginia provides the authority for the board to promulgate regulations for the licensure of contractors in the Commonwealth. The content of the regulations is pursuant to the board's discretion, but shall not be in conflict with the purposes of the statutory authority.

Purpose: The board seeks to amend the current regulations to include commercial building contractors and residential building contractors. The proposed amendments are required to comply with the provisions of Chapter 116 of the 2013 Acts of Assembly.

Substance: 18VAC50-22-20 defines the scope of practice allowed for each classification. The proposed amendments add the classification of commercial building contractors and outline the scope of practice this classification is permitted to perform. The proposed amendments also amend the current definition of building contractor, changing it to residential building contractor, and change the definition so that it only references residential work.

18VAC50-22-30 defines the scope of practice allowed for each specialty. The proposed amendments change the definition of any specialty that requires a reference to the new commercial building contractor classification.

Issues: In amending these regulations, the Board for Contractors is complying with the provisions of Chapter 116 of the 2013 Acts of Assembly, which establish the requirement for "commercial building contractors" and "residential building contractors." The General Assembly determined a need for this level of regulation to protect the public. One advantage of these amendments is to ensure that work done on both residential property and commercial property is performed by companies that have demonstrated enough experience to reasonably assume competency in the specific area in which they are licensed. Another advantage of these amendments is to commercial building contractors. The new legislation excludes a contractor holding the commercial building contractor classification from paying into the Virginia Contractor Transaction Recovery Fund.

One possible disadvantage of these amendments is that a contractor who performs both residential and commercial building will need to apply for a contractor license with both classifications. The qualified individual will need to complete an exam for each classification. Another potential disadvantage is a decrease in the balance of the Transaction Recovery Fund. This decrease is expected to be minimal.

The primary advantage to the agency is that the revisions to the regulations will make it easier for investigations concerning the Transaction Recovery Fund. There are no disadvantages to the agency or the Commonwealth.

Department of Planning and Budget's Economic Impact Analysis:

Summary of the Proposed Amendments to Regulation. Pursuant to Chapter 116 of the 2013 Acts of the Assembly, the Board for Contractors (Board) proposes to split contractor classification into two categories and specify which specialties fall under each classification.

Result of Analysis. Benefits likely outweigh costs for these proposed changes.

Estimated Economic Impact. Currently, contractors are licensed by the Board as Class A, B or C contractors depending on the value of the jobs they are contracted to complete. In 2013, the General Assembly passed legislation that split the contractor classification in two so that Class A, B or C licenses will classify contractors as commercial building contractors or residential building contractors (or both). The Board now proposes to amend these regulations to conform to Chapter 116 and to specify which specialties fall under each classification so that Board staff, as well as regulated entities, have an understanding of which larger classification is necessary to do certain types of work. Specifically, 1) billboard contracting, 2) commercial improvement contracting, 3) farm improvement contracting, 4) marine facility contracting and 5) recreational facility contracting will fall under the commercial building contractor classification; home improvement contracting will fall under the residential building contractor classification. Additionally, 1) Concrete contracting, 2) industrial building contracting, 3) landscape services contracting, 4) masonry contracting, 5) painting and wallcovering contracting, 6) roofing contracting and 7) swimming pool contracting may fall under either classification depending on the type of property the contractor is working on.

Board staff reports that all currently licensed contractors will be issued appropriate licenses with both classifications and that individuals applying for contractor licensure in the future may receive one or both classifications (with as many specialty designations as they are qualified for) at the time of initial licensure for the same fee paid now for a general building contractors license. Contractors will continue to pay additional fees for specialties added to their licenses after initial licensure.

Licensed contractors are unlikely to incur extra costs on account of these proposed regulations. Regulated entities and other interested parties are likely to gain a small benefit from eliminating possible confusion by having these regulations conform to relevant legislation.

Businesses and Entities Affected. Board staff reports that, as of September 30, 2013, the Board licenses 92,200 contractors. All of these entities, as well as any others that might want to be licensed as contractors in the future, will be affected by these proposed regulations.

Localities Particularly Affected. No locality will be particularly affected by this proposed regulatory action.

Projected Impact on Employment. This regulatory action is unlikely to impact employment in the Commonwealth.

Effects on the Use and Value of Private Property. This regulatory action is unlikely to affect the use or value of private property in the Commonwealth.

Small Businesses: Costs and Other Effects. Affected small businesses are unlikely to incur any additional costs on account of this regulatory action.

Small Businesses: Alternative Method that Minimizes Adverse Impact. Affected small businesses are unlikely to incur any additional costs on account of this regulatory action.

Real Estate Development Costs. This regulatory action will likely have no effect on real estate development costs in the Commonwealth.

Legal Mandate. The Department of Planning and Budget (DPB) has analyzed the economic impact of this proposed regulation in accordance with § 2.2-4007.04 of the Administrative Process Act and Executive Order Number 14 (10). Section 2.2-4007.04 requires that such economic impact analyses include, but need not be limited to, a determination of the public benefit, the projected number of businesses or other entities to whom the regulation would apply, the identity of any localities and types of businesses or other entities particularly affected, the projected number of persons and employment positions to be affected, the projected costs to affected businesses or entities to implement or comply with the regulation, and the impact on the use and value of private property. Further, if the proposed regulation has an adverse effect on small businesses, § 2.2-4007.04 requires that such economic impact analyses include (i) an identification and estimate of the number of small businesses subject to the regulation; (ii) the projected reporting, recordkeeping, and other administrative costs required for small businesses to comply with the regulation, including the type of professional skills necessary for preparing required reports and other documents; (iii) a statement of the probable effect of the regulation on affected small businesses; and (iv) a description of any less intrusive or less costly alternative methods of achieving the purpose of the regulation. The analysis presented above represents DPB's best estimate of these economic impacts.

Agency's Response to Economic Impact Analysis: The Board for Contractors concurs with the analysis of the Department of Planning and Budget.

Summary:

Pursuant to Chapter 116 of the 2013 Acts of Assembly, the proposed amendments (i) add the classification of commercial building contractor and outline the scope of practice this classification is permitted to perform, (ii) change the current definition of building contractor to residential building contractor and amend the definition so that it only references residential work, and (iii) change the definition of any specialty that requires a reference to the new commercial building contractor classification.

18VAC50-22-20. Definitions of license classifications.

The following words and terms when used in this chapter unless a different meaning is provided or is plainly required by the context shall have the following meanings:

"Building contractors" (Abbr: BLD) means those individuals whose contracts include construction on real property owned, controlled or leased by another person of commercial, industrial, institutional, governmental, residential (single-family, two-family or multifamily) and accessory use buildings or structures. This classification also provides for remodeling, repair, improvement or demolition of these buildings and structures.

If the BLD contractor performs specialty services other than those listed below, all required specialty designations shall be obtained. The BLD contractor may act as a prime contractor and contract with subcontractors to perform work not permitted by the BLD license. The building classification includes but is not limited to the functions carried out by the following specialties:

Billboard/sign contracting

Commercial improvement contracting

Concrete contracting

Farm improvement contracting

Home improvement contracting

Industrialized building contracting

Landscape service contracting

Marine facility contracting

Masonry contracting

Recreational facility contracting

Roofing contracting

"Commercial building contractors" (Abbr: CBC) means those individuals whose contracts include construction, remodeling, repair, improvement, removal, or demolition on real property owned, controlled, or leased by another person of commercial, industrial, institutional, governmental, and accessory use buildings or structures. The CBC classification does not provide for electrical, plumbing, HVAC, or gas fitting services and does not allow construction, removal, repair, improvement, or demolition of dwellings and townhouses.

If the CBC performs specialty services other than those listed in this definition, all required specialty designations shall be obtained. The CBC may act as a prime contractor and contract with subcontractors to perform work not permitted by the CBC license. The commercial building classification includes but is not limited to the functions carried out by the following specialties for contracts of commercial, institutional, governmental, and accessory use buildings or structures, including multi-family housing:

Billboard/sign contracting

Commercial improvement contracting

Concrete contracting

Farm improvement contracting

Industrialized building contracting

Landscape service contracting

Marine facility contracting

Masonry contracting

Painting and wallcovering contracting

Recreational facility contracting

Roofing contracting

Swimming pool contracting

"Electrical contractors" (Abbr: ELE) means those individuals whose contracts include the construction, repair, maintenance, alteration, or removal of electrical systems. This classification provides for all work covered by the electrical provisions of the USBC including electronic/communication service contracting (ESC) and fire alarm systems contracting (FAS) specialties. A firm holding an ELE license is responsible for meeting all applicable individual license and certification regulations.

"Highway/heavy contractors" (Abbr: H/H) means those individuals whose contracts include construction, repair, improvement, or demolition of the following:

Bridges

Dams

Drainage systems

Foundations

Parking lots

Public transit systems

Rail roads

Roads

Runways

Streets

Structural signs & and lights

Tanks

The functions carried out by these contractors include but are not limited to the following:

Building demolition

Clearing

Concrete work

Excavating

Grading

Nonwater well drilling

Paving

Pile driving

Road marking

Steel erection

These contractors also install, maintain, or dismantle the following:

1. Power systems for the generation and primary and secondary distribution of electric current ahead of the customer's meter;

2. Pumping stations and treatment plants;

3. Telephone, telegraph, or signal systems for public utilities; and

4. Water, gas, and sewer connections to residential, commercial, and industrial sites, subject to local ordinances.

This classification may also install backflow prevention devices incidental to work in this classification when the installer has received formal vocational training approved by the board that included instruction in the installation of backflow prevention devices.

"HVAC contractors" (Abbr: HVA) means those individuals whose work includes the installation, alteration, repair, or maintenance of heating systems, ventilating systems, cooling systems, steam and hot water heaters, heating systems, boilers, process piping, and mechanical refrigeration systems, including tanks incidental to the system. This classification does not provide for fire suppression installations, sprinkler system installations, or gas piping. A firm holding a HVAC license is responsible for meeting all applicable individual license and certification regulations. This classification may install backflow prevention devices incidental to work in this classification.

"Plumbing contractors" (Abbr: PLB) means those individuals whose contracts include the installation, maintenance, extension, or alteration, or removal of all piping, fixtures, appliances, and appurtenances in connection with any of the following:

Backflow prevention devices

Boilers

Hot water baseboard heating systems

Hot water heaters

Hydronic systems

Limited area sprinklers (as defined by the USBC)

Process piping

Public/private water supply systems within or adjacent to any building, structure, or conveyance

Sanitary or storm drainage facilities

Steam heating systems

Storage tanks incidental to the installation of related systems

Venting systems related to plumbing

These contractors also install, maintain, extend, or alter the following:

Liquid waste systems

Sewerage systems

Storm water systems

Water supply systems

This classification does not provide for (i) gas piping or (ii) the function of fire sprinkler contracting as noted above except for limited area sprinklers as defined by the USBC. A firm holding a PLB license is responsible for meeting all applicable individual license and certification regulations. The classification may install sprinkler systems permitted to be designed in accordance with the plumbing provisions of the USBC when the installer has received formal vocational training approved by the board that included instruction of installation of sprinkler systems.

"Residential building contractors" (Abbr: RBC) means those individuals whose contracts include construction, remodeling, repair, improvement, removal, or demolition on real property owned, controlled, or leased by another person of dwellings and townhouses, including accessory buildings or structures on such property. The RBC classification does not provide for electrical, plumbing, HVAC, or gas fitting services and does not allow construction, removal, repair, or improvement to commercial, industrial, institutional, or governmental use structures outside of dwellings and townhouses, except for the repair or improvement to dwelling units within commercial buildings.

The residential building classification includes but is not limited to the functions carried out by the following specialties for contracts of dwellings and townhouses and related accessory use buildings or structures:

Concrete contracting

Home improvement contracting

Industrialized building contracting

Landscape service contracting

Masonry contracting

Painting and wallcovering contracting

Roofing contracting

Swimming pool contracting

"Specialty \contractors" means those individuals whose contracts are for specialty services which that do not generally fall within the scope of any other classification within this chapter.

18VAC50-22-30. Definitions of specialty services.

The following words and terms when used in this chapter unless a different meaning is provided or is plainly required by the context shall have the following meanings:

"Accessibility services contracting" (Abbr: ASC) means the service that provides for all work in connection with the constructing, installing, altering, servicing, repairing, testing, or maintenance of wheelchair lifts, incline chairlifts, dumbwaiters with a capacity limit of 300 pounds, and private residence elevators in accordance with the Virginia Uniform Statewide Building Code (13VAC5-63). The EEC specialty may also perform this work. This specialty does not include work on limited use-limited application (LULA) elevators.

"Accessibility services contracting – LULA" (Abbr: ASL) means the service that provides for all work in connection with the constructing, installing, altering, servicing, repairing, testing, or maintenance of wheelchair lifts, incline chairlifts, dumbwaiters with a capacity limit of 300 pounds, private residence elevators, and limited use-limited application (LULA) elevators in accordance with the Virginia Uniform Statewide Building Code (13VAC5-63). The EEC specialty may also perform this work.

"Alternative energy system contracting" (Abbr: AES) means the service that provides for the installation, repair or improvement, from the customer's meter, of alternative energy generation systems, supplemental energy systems and associated equipment annexed to real property. This service does not include the installation of emergency generators powered by fossil fuels. No other classification or specialty service provides this function. This specialty does not provide for electrical, plumbing, gas fitting, or HVAC functions.

"Asbestos contracting" (Abbr: ASB) means the service that provides for the installation, removal, or encapsulation of asbestos containing materials annexed to real property. No other classification or specialty service provides for this function.

"Asphalt paving and sealcoating contracting" (Abbr: PAV) means the service that provides for the installation of asphalt paving or sealcoating, or both, on subdivision streets and adjacent intersections, driveways, parking lots, tennis courts, running tracks, and play areas, using materials and accessories common to the industry. This includes height adjustment of existing sewer manholes, storm drains, water valves, sewer cleanouts and drain grates, and all necessary excavation and grading. The H/H classification also provides for this function.

"Billboard/sign contracting" (Abbr: BSC) means the service that provides for the installation, repair, improvement, or dismantling of any billboard or structural sign permanently annexed to real property. H/H and BLD CBC are the only other classifications that can perform this work except that a contractor in this specialty may connect or disconnect signs to existing electrical circuits. No trade related plumbing, electrical, or HVAC work is included in this function.

"Blast/explosive contracting" (Abbr: BEC) means the service that provides for the use of explosive charges for the repair, improvement, alteration, or demolition of any real property or any structure annexed to real property.

"Commercial improvement contracting" (Abbr: CIC) means the service that provides for repair or improvement to nonresidential property and multifamily property, as defined structures not defined as dwellings and townhouses in the in the Virginia Uniform Statewide Building Code (13VAC5-63). The BLD CBC classification also provides for this function. The CIC classification does not provide for the construction of new buildings, accessory buildings, electrical, plumbing, HVAC, or gas work.

"Concrete contracting" (Abbr: CEM) means the service that provides for all work in connection with the processing, proportioning, batching, mixing, conveying, and placing of concrete composed of materials common to the concrete industry. This includes but is not limited to finishing, coloring, curing, repairing, testing, sawing, grinding, grouting, placing of film barriers, sealing, and waterproofing. Construction and assembling of forms, molds, slipforms, pans, centering, and the use of rebar is also included. The BLD CBC, RBC, and H/H classifications also provide for this function.

"Electronic/communication service contracting" (Abbr: ESC) means the service that provides for the installation, repair, improvement, or removal of electronic or communications systems annexed to real property including telephone wiring, computer cabling, sound systems, data links, data and network installation, television and cable TV wiring, antenna wiring, and fiber optics installation, all of which operate at 50 volts or less. A firm holding an ESC license is responsible for meeting all applicable tradesman licensure standards. The ELE classification also provides for this function.

"Elevator/escalator contracting" (Abbr: EEC) means the service that provides for the installation, repair, improvement, or removal of elevators or escalators permanently annexed to real property. A firm holding an EEC license is responsible for meeting all applicable individual license and certification regulations. No other classification or specialty service provides for this function.

"Environmental monitoring well contracting" (Abbr: EMW) means the service that provides for the construction of a well to monitor hazardous substances in the ground.

"Environmental specialties contracting" (Abbr: ENV) means the service that provides for installation, repair, removal, or improvement of pollution control and remediation devices. No other specialty provides for this function. This specialty does not provide for electrical, plumbing, gas fitting, or HVAC functions.

"Equipment/machinery contracting" (Abbr: EMC) means the service that provides for the installation or removal of equipment or machinery including but not limited to conveyors or heavy machinery. Boilers exempted by the Virginia Uniform Statewide Building Code (13VAC5-63) but regulated by the Department of Labor and Industry are also included in this specialty. This specialty does not provide for any electrical, plumbing, process piping, or HVAC functions.

"Farm improvement contracting" (Abbr: FIC) means the service that provides for the installation, repair, or improvement of a nonresidential farm building or structure, or nonresidential farm accessory-use structure, or additions thereto. The BLD CBC classification also provides for this function. The FIC specialty does not provide for any electrical, plumbing, HVAC, or gas fitting functions.

"Fire alarm systems contracting" (Abbr: FAS) means the service that provides for the installation, repair, or improvement of fire alarm systems which that operate at 50 volts or less. The ELE classification also provides for this function. A firm with an FAS license is responsible for meeting all applicable tradesman licensure standards.

"Fire sprinkler contracting" (Abbr: SPR) means the service that provides for the installation, repair, alteration, addition, testing, maintenance, inspection, improvement, or removal of sprinkler systems using water as a means of fire suppression when annexed to real property. This specialty does not provide for the installation, repair, or maintenance of other types of fire suppression systems. The PLB classification allows for the installation of systems permitted to be designed in accordance with the plumbing provisions of the USBC. This specialty may engage in the installation of backflow prevention devices in the fire sprinkler supply main and incidental to the sprinkler system installation when the installer has received formal vocational training approved by the board that included instruction in the installation of backflow prevention devices.

"Fire suppression contracting" (Abbr: FSP) means the service that provides for the installation, repair, improvement, or removal of fire suppression systems including but not limited to halon and other gas systems;, dry chemical systems;, and carbon dioxide systems annexed to real property. No other classification provides for this function. The FSP specialty does not provide for the installation, repair, or maintenance of water sprinkler systems.

"Gas fitting contracting" (Abbr: GFC) means the service that provides for the installation, repair, improvement, or removal of gas piping and appliances annexed to real property. A firm holding a GFC license is responsible for meeting all applicable individual (tradesman) licensure regulations.

"Home improvement contracting" (Abbr: HIC) means the service that provides for repairs or improvements to one-family and two-family residential buildings dwellings and townhouses as defined in the Virginia Uniform Statewide Building Code (13VAC5-63) or structures annexed to real property those dwellings or townhouses and improvements to dwelling units within commercial buildings. The BLD RBC classification also provides for this function. The HIC specialty does not provide for electrical, plumbing, HVAC, or gas fitting functions. It does not include high rise buildings, buildings with more than two dwelling units, or new construction functions beyond the existing building structure other than decks, patios, driveways, and utility out buildings of 200 square feet or less.

"Industrialized building contracting" (Abbr: IBC) means the service that provides for the installation or removal of an industrialized building as defined in the Virginia Industrialized Building Safety Regulations (13VAC5-91). This classification covers foundation work in accordance with the provisions of the Virginia Uniform Statewide Building Code (13VAC5-63) and allows the licensee to complete internal tie-ins of plumbing, gas, electrical, and HVAC systems. It does not allow for installing additional plumbing, gas, electrical, or HVAC work such as installing the service meter, or installing the outside compressor for the HVAC system. The BLD classification CBC and RBC classifications also provides provide for this function.

"Landscape irrigation contracting" (Abbr: ISC) means the service that provides for the installation, repair, improvement, or removal of irrigation sprinkler systems or outdoor sprinkler systems. The PLB and H/H classifications also provide for this function. This specialty may install backflow prevention devices incidental to work in this specialty when the installer has received formal vocational training approved by the board that included instruction in the installation of backflow prevention devices.

"Landscape service contracting" (Abbr: LSC) means the service that provides for the alteration or improvement of a land area not related to any other classification or service activity by means of excavation, clearing, grading, construction of retaining walls for landscaping purposes, or placement of landscaping timbers. This specialty may remove stumps and roots below grade. The BLD CBC, RBC, and H/H classifications also provide for this function.

"Lead abatement contracting" (Abbr: LAC) means the service that provides for the removal or encapsulation of lead-containing materials annexed to real property. No other classification or specialty service provides for this function, except that the PLB and HVA classifications may provide this service incidental to work in those classifications.

"Liquefied petroleum gas contracting" (Abbr: LPG) means the service that includes the installation, maintenance, extension, alteration, or removal of all piping, fixtures, appliances, and appurtenances used in transporting, storing, or utilizing liquefied petroleum gas. This excludes hot water heaters, boilers, and central heating systems that require an HVA or PLB license. The GFC specialty also provides for this function. A firm holding an LPG license is responsible for meeting all applicable individual license and certification regulations.

"Manufactured home contracting" (Abbr: MHC) means the service that provides for the installation or removal of a manufactured home as defined in the Virginia Manufactured Home Safety Regulations (13VAC5-95). This classification does not cover foundation work; however, it does allow installation of piers covered under HUD regulations. It does allow a licensee to do internal tie-ins of plumbing, gas, electrical, or HVAC equipment. It does not allow for installing additional plumbing, gas, electrical, or HVAC work such as installing the service meter, or installing the outside compressor for the HVAC system. No other specialty provides for this function.

"Marine facility contracting" (Abbr: MCC) means the service that provides for the construction, repair, improvement, or removal of any structure the purpose of which is to provide access to, impede, or alter a body of surface water. The BLD CBC and H/H classifications also provide for this function. The MCC specialty does not provide for the construction of accessory structures or electrical, HVAC, or plumbing functions.

"Masonry contracting" (Abbr: BRK) means the service that includes the installation of brick, concrete block, stone, marble, slate, or other units and products common to the masonry industry, including mortarless type masonry products. This includes installation of grout, caulking, tuck pointing, sand blasting, mortar washing, parging, and cleaning and welding of reinforcement steel related to masonry construction. The BLD classification CBC and RBC classifications and the HIC and CIC specialties also provide for this function.

"Natural gas fitting provider contracting" (Abbr: NGF) means the service that provides for the incidental repair, testing, or removal of natural gas piping or fitting annexed to real property. This does not include new installation of gas piping for hot water heaters, boilers, central heating systems, or other natural gas equipment which that requires an HVA or PLB license. The GFC specialty also provides for this function. A firm holding an NGF license is responsible for meeting all applicable individual license and certification regulations.

"Painting and wallcovering contracting" (Abbr: PTC) means the service that provides for the application of materials common to the painting and decorating industry for protective or decorative purposes, the installation of surface coverings such as vinyls, wall papers, and cloth fabrics. This includes surface preparation, caulking, sanding, and cleaning preparatory to painting or coverings and includes both interior and exterior surfaces. The BLD classification CBC and RBC classifications and the HIC and CIC specialties also provide for this function.

"Radon mitigation contracting" (Abbr: RMC) means the service that provides for additions, repairs or improvements to buildings or structures, for the purpose of mitigating or preventing the effects of radon gas. This function can only be performed by a firm holding the BLD classification or CIC (for other than one-family and two-family dwellings), FIC (for nonresidential farm buildings) or HIC (for one-family and two-family dwellings) specialty services CBC and RBC classifications or the CIC, FIC, or HIC specialties. No electrical, plumbing, gas fitting, or HVAC functions are provided by this specialty.

"Recreational facility contracting" (Abbr: RFC) means the service that provides for the construction, repair, or improvement of any recreational facility, excluding paving and the construction of buildings, plumbing, electrical, and HVAC functions. The BLD CBC classification also provides for this function.

"Refrigeration contracting" (Abbr: REF) means the service that provides for installation, repair, or removal of any refrigeration equipment (excluding HVAC equipment). No electrical, plumbing, gas fitting, or HVAC functions are provided by this specialty. This specialty is intended for those contractors who repair or install coolers, refrigerated casework, ice-making machines, drinking fountains, cold room equipment, and similar hermetic refrigeration equipment. The HVAC classification also provides for this function.

"Roofing contracting" (Abbr: ROC) means the service that provides for the installation, repair, removal, or improvement of materials common to the industry that form a watertight, weather resistant surface for roofs and decks. This includes roofing system components when installed in conjunction with a roofing project, application of dampproofing or waterproofing, and installation of roof insulation panels and other roof insulation systems above roof deck. The BLD classification CBC and RBC classifications and the HIC and CIC specialties also provide for this function.

"Sewage disposal systems contracting" (Abbr: SDS) means the service that provides for the installation, repair, improvement, or removal of septic tanks, septic systems, and other on-site onsite sewage disposal systems annexed to real property.

"Swimming pool construction contracting" (Abbr: POL) means the service that provides for the construction, repair, improvement, or removal of in-ground swimming pools. The BLD classification CBC and RBC classifications and the RFC specialty also provide for this function. No trade related plumbing, electrical, backflow, or HVAC work is included in this specialty.

"Vessel construction contracting" (Abbr: VCC) means the service that provides for the construction, repair, improvement, or removal of nonresidential vessels, tanks, or piping that hold or convey fluids other than sanitary, storm, waste, or potable water supplies. The H/H classification also provides for this function.

"Water well/pump contracting" (Abbr: WWP) means the service that provides for the installation of a water well system, including geothermal wells, which includes construction of a water well to reach groundwater, as defined in § 62.1-255 of the Code of Virginia, and the installation of the well pump and tank, including pipe and wire, up to and including the point of connection to the plumbing and electrical systems. No other classification or specialty service provides for construction of water wells. This regulation shall not exclude PLB, ELE, or HVAC from installation of pumps and tanks.

Note: Specialty contractors engaging in construction that involves the following activities or items or similar activities or items may fall under the CIC, HIC, and/or FIC specialty services, or they may fall under the BLD classification CBC and/or RBC classifications.

Appliances	Fireplaces	Rubber linings
Awnings	Fireproofing	Sandblasting
Blinds	Fixtures	Scaffolding
Bulkheads	Floor coverings	Screens
Cabinetry	Flooring	Sheet metal
Carpentry	Floors	Shutters
Carpeting	Glass	Siding
Casework	Glazing	Skylights
Ceilings	Grouting	Storage bins and lockers
Chimneys	Grubbing	Stucco
Chutes	Guttering	Temperature controls
Conduit rodding	Insulation	Terrazzo
Curtains	Interior decorating	Tile
Curtain walls	Lubrication	Vaults
Decks	Metal work	Vinyl flooring
Doors	Millwrighting	Wall panels
Drapes	Mirrors	Wall tile
Drywall	Miscellaneous iron	Waterproofing
Epoxy	Ornamental iron	Weatherstripping
Exterior decoration	Partitions	Welding
Facings	Protective coatings	Windows
Fences	Railings	Wood floors
Fiberglass	Rigging